Formula Document

View the complete formulation with ingredients, percentages and step-by-step procedures.

Formulation Document
Stop Being Sensitive SPF 50 Sun Cream

Formulation Document

PHASE A1

INCI NAME

% W/W

Water (Aqua)

Q.S: 35.98

Disodium EDTA

0.10

Microcrystalline Cellulose [nano]

2.00

PHASE A2

INCI NAME

% W/W

Glycerin

3.00

Sclerotium gum, Xanthan gum

0.50

PHASE A3

INCI NAME

% W/W

Aminomethyl Propanol

0.08

PHASE B

INCI NAME

% W/W

Ethyl Macadamiate

1.00

Caprylic/Capric Triglyceride

2.00

Vegetable Oil, Simmondsia chinensis (Jojoba) Seed Oil, Curcuma longa (Turmeric) Root Extract

4.00

Cetearyl Olivate, Sorbitan Olivate

3.50

Cetearyl Alcohol, Cetyl Palmitate, Sorbitan Palmitate, Sorbitan Oleate

2.50

Ethylhexyl Methoxycrylene

1.00

PHASE C

INCI NAME

% W/W

Zinc Oxide, Polyhydroxystearic Acid

25.00

Caprylic/Capric Triglyceride

7.00

Ethyl Macadamiate

7.00

PHASE D

INCI NAME

% W/W

Citric Acid

0.74

PHASE E

INCI NAME

% W/W

Glycerin

2.50

Hydrolyzed Jojoba Esters, Water (Aqua)

1.00

PHASE F

INCI NAME

% W/W

Phenoxyethanol, Ethylhexylglycerin

0.80

Tocopherol

0.30

Formulation Procedure

Procedure (Hot Process)

  1. Mix ingredients of phase A1 until complete dispersion.
  2. Preblend ingredients of phase A2.
  3. Add this preblend to phase A1 and mix until a homogeneous gel is obtained (Silverson / Ultra-Turrax 7 min at 7,000 rpm).
  4. Adjust pH to 6.5 with phase A3.
  5. Heat phase A to 80°C.
  6. Mix ingredients of phase B under normal agitation and heat to 75°C.
  7. When both phases are at their required temperature, add phase B to phase A and homogenize (Silverson / Ultra-Turrax 5 min at 5,500 rpm) then cool down to RT using anchor pale stirrer.
  8. Mix ingredients of phase C and homogenize (Silverson / Ultra-Turrax 3 min at 6,000 rpm).
  9. Slowly add phase C to the main vessel while mixing.
  10. Adjust pH to 7.2 with phase D.
  11. Preblend ingredients of phase E and add them to the main vessel while mixing.
  12. Add ingredients of phase F in the order listed while mixing.
  13. Homogenize the formula (Silverson / Ultra-Turrax 2 min at 3,000 rpm).

Additional Notes

  • Stable 3 months at 4°C, RT and 40°C.
  • Aspect: Smooth thick white cream
  • pH = 7.42
  • Viscosity (spindle TD-94; 10 rpm; 1 min) = 98,400 cPs (49.2%)
  • in vitro SPF (measured) = 56.5
  • in vitro SPF (calculated with BASF simulator) = 11.2
  • Natural Origin % = 97.88
  • Application: Apply evenly on face and/or body. Re-apply every 2 hours for optimal protection.

Vizor Product Used

Powders
POWDERS

Super Zinc Sheer® Natural

High-performance natural ZnO powder—strong UV efficiency, high transparency and minimal white cast for sophisticated mineral formulas. COSMOS. Patented and non-nano.

Product Code: 1004 · INCI: Zinc Oxide, Polyhydroxystearic Acid
REQUEST A SAMPLE VIEW PRODUCT